Glass to glass hinge in 316G stainless, for shower screen enclosures, glass gates and partitions. Suits 8mm to 12mm glass. In stock for fast dispatch.

Clicks shut at 90 degrees — no latch

The hinge holds the door closed at 90 degrees on its own, so you do not need a separate catch or latch. Fewer fittings on the glass, a cleaner look, and nothing else to line up.

Glass to glass, not glass to wall

This one hangs a glass door from a fixed glass panel. If you are hanging a gate or shower door from a wall or post instead, our shower door and gate hinges are the ones you want.

Dimensions

Dimensioned drawing available from the PDF button on this page. Hinges usually require cut-outs in the glass, so send us the details with your sizes.

Holes must be specified before toughening. Toughened glass cannot be drilled once it has been through the furnace, so tell us the hole positions when you order the glass — a panel cannot be adapted on site.

Material

316 stainless steel, the marine grade — suitable inside or out, and what we would specify near the coast. All our fittings are 316 unless the listing says otherwise; where a fitting is plated steel rather than stainless we say so plainly, because the two look identical and only one belongs outdoors.

Glass to suit

Suits 8mm to 12mm glass — our 10mm clear toughened is the usual choice, with 8mm and 12mm also cut to size.

We cut every panel to your own dimensions, so glass and fittings come from one place and actually suit each other. See all glass clamps, the full balustrade and handrail components range, or complete metal and glass balustrade systems. Call 0114 243 9009 or email sales@diometonline.co.uk.