13.5mm toughened and laminated glass, cut to your sizes. Two pieces of 6mm toughened glass bonded with a 1.5mm interlayer, 13.5mm overall.

Some of our suppliers use a thinner interlayer, so the overall thickness may reduce nominally. If that dimension is critical to your job, get in touch before ordering and we will confirm exactly what you will receive.

What 13.5mm is for

It is the entry point of our no-handrail laminated range, and it covers two situations:

• External balustrades with no handrail, in a posted system — the posts are carrying the run and the glass infills between them, so the glass is not working as hard as it would frameless.
• Internal frameless balustrades with no handrail — frameless, but inside, so without the wind loading an external run has to take.

Step up to 17.5mm once a frameless run goes outside.

Why laminated at all

Because there is no handrail. A single toughened pane, once broken, collapses into granules and leaves the opening empty. In a laminated panel the interlayer holds the broken glass together so the panel stays in place until it can be replaced — which is the whole point when nothing else is spanning the top of the run.

Which laminate thickness?

Once you are into laminated glass the thickness is decided by three things: whether the run is inside or outside, how much frame is holding the panel, and whether it is domestic or commercial.

• 13.5mm — external balustrade with no handrail in a posted system, or an internal frameless balustrade with no handrail.
• 17.5mm — external frameless balustrade with no handrail.
• 21.5mm — external frameless balustrade, commercial.

If your balustrade does have a handrail, you may not need laminated at all — a framed run is usually 10mm toughened and frameless with a handrail is usually 15mm toughened. Our glass balustrade regulations guide explains why the handrail changes the answer.

Ordering and delivery

Every panel is made to your own dimensions, to the millimetre. We hold no standard sizes — put the length and height you need into the calculator and the price shown is for that exact panel.

It can also be supplied drilled, shaped, notched, frosted or painted, all specified up front and done as part of manufacture. Toughened glass cannot be cut or drilled once it has been through the furnace, so nothing can be altered on site. For anything unusual use our bespoke toughened glass service.

This listing is for glass only. Complete systems with the glass sized to suit are in our balustrade category, and we supply glass clamps and balustrade components separately.

Edges and standards

All edges polished, corners with a proper 5mm radius as standard unless otherwise specified — not the dubbed corner, knocked off by hand, that a lot of suppliers will quote you. Details on our material and finish standards page. All glass toughened in accordance with BS EN 12150 and BS EN 12600.

More information

• Buying toughened glass online
• Types of glass
• Glass toughening
• All you need to know about toughened glass

Laminated glass is 4 weeks from order. Panels travel crated and must be signed for and checked on arrival. Made-to-size glass cannot be returned, as with any bespoke item. Call 0114 243 9009 or email sales@diometonline.co.uk.

A note on specification

The guidance on this page reflects what we typically supply for jobs of this kind, and is offered in good faith to help you order the right thing. It is not a structural specification and it is not a substitute for project-specific design. Barrier heights, spans, loadings, fixings, substrates and exposure all vary from site to site, and the final specification for your project remains the responsibility of you, your designer, your structural engineer or your building control body. We manufacture and supply to the sizes and specification you give us. If you are unsure, send us the details before ordering and we will tell you what we would normally supply for a job like yours.