A 42mm tubular stainless steel wall rail finished with grooved end caps, brushed to a 320 grit satin finish. 304 grade, for internal use. Angles are adjustable, so the rail follows the pitch of the stair rather than needing a straight run.

Grooved ends, or standard?

This is the same rail as our standard stainless wall rail, with a different end cap. The groove is a decorative detail only — there is no difference in the steel, the finish, the fixings or how it fits. Pick whichever you prefer the look of.

What is included

• Rail cut to your size, pre-drilled for the brackets
• Grooved end caps, fitted
• Wall brackets, as set out in the PDF sizing guide
• Stainless fixings for timber or masonry, and M5 screws for the brackets

Sizing

Standard sizes are in the dropdown. Anything else is made to your measurements; the PDF guide shows what to measure and where the brackets land. Designed for straightforward DIY fitting.

There is no length limit. What a courier will carry sets the longest single section; beyond that the rail is jointed with an internal sleeve. The join shows as a line rather than as an external bracket, which is the point of doing it that way.

Finish

Brushed 320 grit as standard, with mirror polish available on request. See our material and finish standards.

Heights and regulations

Heights, continuity and second rails are covered in our handrail building regulations guide. We build to what your project requires; the sign-off is your building control officer’s call.

Delivery and fitting

Mainland UK, usually 3 working days. Fitting quoted on multiple orders — 0114 243 9009 or sales@diometonline.co.uk.

Elsewhere in the range

• Stainless handrail on posts — 316 grade, for outside or where there is no wall
• Galvanised and powder coated — painted rather than stainless

See handrails we have fitted in our projects.